HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR

HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR
HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR
HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR

HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR

HPS 4.5" OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge w/ 6" CLR. Representative Image Actual Product May Vary. Remark: HPS does NOT recommend 6061 Aluminum to be used for exhaust systems. HPS 4.5" 90 Degree Bend 6061 Aluminum Elbow Tubing 1 Gauge with 6" Leg Length and.

6 Center Line of Radius is commonly used in industrial, automotive, marine and aerospace industry; Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping setup because 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS 90 Degree Bend aluminum elbow pipe can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds.

Product Type: 90 Degree Bend Aluminum Elbow. Material: 12 Gauge 6061-T6 Aluminum.

Tubing Outside Diameter: 4.5 (114mm). Wall Thickness: 0.079 (2mm).

Leg length on each side: 6. Center line of radius: 6. CP Cometic ACL Ferrea and ARP Kits. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.

We always look to satisfy our customers in whatever needs they may have.


HPS 4.5 OD 90 Degree Bend 6061 Aluminum Elbow Pipe Tubing 12 Gauge with 6 CLR


Index  Links  Contact  Privacy Policies  Service Agreement